2018 new products Wavecom fastrack sierra wireless FXT009 stk ussd gsm modem
1.Based on Wavecom module Q2687(with EDGE) 2.850/900/1800/1900MHz 3.RS232 +Min USB 4.Embedded TCP/IP protocol station.GSM/GPRS
Based on 850/900/1800/1900 Mhz: GSM, SMS, CSD, GPRS, EDGE FR/HR/EFR/AMR
Supplied with Internet plug-in software key. Internet plug-in software key is comprised of TCP/UDP/FTP/HTTP/email components.
· Quad-band GSM/GPRS/EDGE communications on the 800, 900, 1800 and 1900MHz bands
· Programmable ARM9 32-bit processor at 104MHz
· Advanced audio features
· Compact size, just 40 x 32.2 x 4mm
· Footprint compatibility with entire Q Series of intelligent embedded modules
· LINUX, MAC IOS,VISTA,XP,WIN7,WIN8,WIN9,WIN10 ,WINDOWS
This section describes the different interfaces that connect with the FX Series. The FX Series comes with the following interfaces: ♦ 10-pin Micro-Fit Connector ♦ USB Interface (mini-B connector) ♦ 15-pin Sub-D Serial Interface ♦ Main RF Interface ♦ Secondary RF Interface (for FX100 only) ♦ GPS RF Interface (for FX100 only) ♦ SIM Interface ♦ LED Status Indicator
Power Supply Connector
The power supply connector is a 10-pin Micro-Fit connector that is used for: ♦ External DC Power Supply connection with voltage from +4.75V to +32V, at 3A on FXT009 and 3.7A on FX100 ♦ GPIOs connection and GPIO voltage reference ♦ ON/OFF pin to power OFF the FX Series ♦ Interrupt pin
A SUB-D 15-pin connector is available as a serial interface to directly communicate with the FX Series. This serial interface is used for: ♦ RS232 serial link connection ♦ Audio lines connection (microphone and speaker) ♦ BOOT signal connection (not used in FX100) ♦ RESET signal connection
Aside from the serial interface, the Mini-B USB interface (USB slave) may also be used to directly communicate with the FX Series.